Quanta Computer QuantaMesh - Dir

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
479
5.16.4 dir
This command is used to display a list of files in Flash memory.
Syntax
dir [config | opcode [<filename>] ]
<filename> - name of the configuration or image file.
config - configuration file.
opcode - run time operation code.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Column Heading Description
date The date that the file was created.
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.