Quanta Computer QuantaMesh - Show Openflow Installed Meters

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | OpenFlow Commands
1014
10.1.4 show openflow installed meters
This command displays the installed meters information from OpenFlow Controller.
Syntax
show openflow < instance-id > installed meters
Default Setting
None
Command Mode
Privileged EXEC
Examples:
(Quanta) #do show openflow 1 installed meters
Meter ID....................................... 6
Number of bands................................ 1
Band type...................................... Drop
Rate for dropping packets...................... 8000
Size of bursts................................. 4000
Number of flows bound to meter................. 1
Number of packets in input..................... 3134691
Number of bytes in input....................... 200620288
Duration....................................... 274
Band ID........................................ 1
Number of packets in band...................... 650555
Number of bytes in band........................ 41635520
Number of packets out band..................... 2484136
Number of bytes out band....................... 158984768