Quanta Computer QuantaMesh - Show Dcb Fip-Snooping Session

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Data Center Bridging Commands
987
9.1.3 show dcb fip-snooping session
This command displays all FIP snooping sessions for the entire system.
Syntax
show dcb fip-snooping session
Default Setting
None
Command Mode
Privileged Exec
Display Message
VN Port MAC: FCoE MAC address that is used to send the FCoE packets.
FCF Interface Number: The interface to which the FCF is connected
FCF MAC address: MAC address of the FCF..
ENode MAC address: MAC address of the ENode.
ENode Interface Number: The interface to which the ENode is connected