Quanta Computer QuantaMesh - Configuration Commands

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
668
6.2.2 Configuration Commands
6.2.2.1 routing
This command enables routing for an interface.
Syntax
routing
no routing
no - Disable routing for an interface.
Default Setting
Disabled
Command Mode
Interface Config
6.2.2.2 ip routing
This command enables the IP Router Admin Mode for the master switch.
Syntax
ip routing
no ip routing
no - Disable the IP Router Admin Mode for the master switch.
Default Setting
Disabled
Command Mode
Global Config