Quanta Computer QuantaMesh - Configuration Commands

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
632
5.27.2 Configuration Commands
5.27.2.1 udld aggressive
Enable/Disable UDLD protocol in aggressive mode on fiber ports except where locally configured
Syntax
udld aggressive
no udld aggressive
Default Setting
Disabled
Command Mode
Global Config.
5.27.2.2 udld enable
Enable/Disable UDLD protocol on fiber ports except where locally configured
Syntax
udld enable
no udld enable
Default Setting
Disabled
Command Mode
Global Config.