Quanta Computer QuantaMesh - Show Dcb Fip-Snooping Fcf

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Data Center Bridging Commands
988
9.1.4 show dcb fip-snooping fcf
This command displays to what interfaces the FCFs are connected for the entire system.
Syntax
show dcb fip-snooping fcf
Default Setting
None
Command Mode
Privileged Exec
Display Message
FCF MAC: MAC address of the FCF.
FCF Interface Number: Name of the interface to which the FCoE Forwarder (FCF) is connected.
VLAN ID: ID number of the VLAN to which the FCF belongs.
FC MAP: May FC-Map value used by the FCF.
Switch Name: Name ID.
Fabric Name: Name of the FCF.