Quanta Computer QuantaMesh - 10 Openflow Commands; Show Commands; Show Openflow Instance

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | OpenFlow Commands
1011
10 OpenFlow Commands
10.1 Show Commands
10.1.1 show openflow instance
This command displays the OpenFlow instance status and configuration information.
Syntax
show openflow < instance-id >
Default Setting
None
Command Mode
Priviledged EXEC
Examples:
(Quanta) #show openflow 1
Administrative Mode............................ Enable
Operational Status............................. Enabled
Disable Reason................................. None
IP Address..................................... 192.168.2.117
OpenFlow Variant............................... OpenFlow 1.1
Fail Mode...................................... Fail-Secure
Ignore Legacy Protocol......................... Disable
Hybrid Mode.................................... Per-Port
Port List:
--------------------------------------
0/1-0/3,0/5,0/7-0/8,ch1-ch2,ch4,ch6-ch7