Quanta Computer QuantaMesh - Page 835

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands
835
7.2.2.2 ip igmp router-alert-check
This command Disables/Enables Router-Alert validation for IGMP packets.
Syntax
ip igmp router-alert-check
no ip igmp router-alert-check
no - This command disables/Enables Router-Alert validation for IGMP packets.
Default Setting
Disabled
Command Mode
Global Config
7.2.2.3 ip igmp version
This command configures the version of IGMP for an interface.
Syntax
ip igmp version {1 | 2 | 3}
no ip igmp version
<1- 3> - The igmp version number.
no - This command resets the version of IGMP for this interface. The version is reset to the default
value.
Default Setting
3
Command Mode
Interface Config