Quanta Computer QuantaMesh - Page 117

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
117
5.2.6.3 ip igmp snooping interfacemode
The user can go to the CLI Global/Interface Configuration Mode to set IGMP Snooping on one interface
or all interfaces, use the ip igmp snooping interfacemode global/interface configuration command.
Use the no ip igmp snooping interfacemode disable IGMP Snooping on all interfaces.
Syntax
ip igmp snooping interfacemode all
no ip igmp snooping interfacemode all
ip igmp snooping interfacemode
no ip igmp snooping interfacemode
Default Setting
None
Command Mode
Global Config
Interface Config
5.2.6.4 ip igmp snooping fast-leave
The user can go to the CLI Global/Interface Configuration Mode to set IGMP Snooping fast-leave admin
mode on a selected interface or all interfaces, use the ip igmpsnooping fast-leave global/interface
configuration command. Use the no ip igmp snooping fast-leave disable IGMP Snooping fast-leave
admin mode.
Syntax
ip igmp snooping fast-leave
no ip igmp snooping fast-leave
Default Setting
Disabled
Command Mode
Global Config
Interface Config
5.2.6.5 ip igmp snooping groupmembershipinterval
The user can go to the CLI Global/Interface Configuration Mode to set the IGMP Group Membership
Interval time on one interface or all interfaces, use the ip igmp snooping groupmembershipinterval