Quanta Computer QuantaMesh - Page 141

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
141
5.2.8.3 show ipv6 mld snooping mrouter vlan
The user can go to the CLI Privilege Exec to display information about statically configured multicast
router-attached interfaces, use the show ipv6 mld snooping mrouter vlan Privilege command.
Syntax
show ipv6 mld snooping mrouter vlan {<slot/port> | port-channel <portchannel-id>}
<slot/port> - Interface number.
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VLAN ID: Displays the list of VLANs of which the interface is a member.
Interface: Shows the interface on which multicast router information is being displayed.