Quanta Computer QuantaMesh - Page 165

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
165
5.2.10.5 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a ID for a
configured port-channel. The option all sets every configured port-channel with the same administrative
mode setting.
Syntax
port-channel linktrap {<ID> | all}
no port-channel linktrap {<ID> | all}
<ID> - The port-channel interface number. The range of the port-channel ID is 1 to 64.
all - all port-channel interfaces.
no - This command disables link trap notifications for the port-channel (LAG). The interface is a ID
for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting.
Default Setting
Enabled
Command Mode
Global Config