Quanta Computer QuantaMesh - Page 179

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
179
5.2.11.3 storm-control multicast
This command enables multicast storm recovery mode on the selected interface.
Syntax
storm-control multicast
no storm-control multicast
no - This command disables multicast storm recovery mode on the selected interface.
Default Setting
None
Command Mode
Interface Config
This command enables multicast storm recovery mode on all interfaces.
Syntax
storm-control multicast
no storm-control multicast
no - This command disables multicast storm recovery mode on all interfaces.
Default Setting
None
Command Mode
Global Config