Quanta Computer QuantaMesh - Page 191

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
191
5.2.14.2 link state
Enable/Disable the link state admin mode. Use ‘link state’ to enable the admin mode of redundant
function, and use no command to disable the function.
Create/Destroy the link state group. Use ‘link state group’ to create a group. Use no command to destroy
the group.
Enable/Disable a link state group. Use link state group enable <group id> to enable individual group, and
use no command to disable a group.
Syntax
link state [group | [enable <1-6>]]
no link state [group <1-6> | [enable <1-6>]]
no - This command disables link state function.
Command Mode
Global Config