Quanta Computer QuantaMesh - Page 209

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
209
5.3.3.6 terminal length
This command uses to configure the columns per page for the vty session.
Syntax
terminal-length <0 | 5-48>
<0 | 5-48> - Columns per page (Range: 0 or 5 - 48).
no - This command sets the value to the default.
Default Setting
24
Command Mode
Line Vty
5.3.3.7 maxsessions
This command specifies the maximum number of remote connection sessions that can be established. A
value of 0 indicates that no remote connection can be established. The range is 0 to 5.
Syntax
maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no - This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Line Vty