Quanta Computer QuantaMesh - Page 219

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
219
5.3.5.2 snmp-server sysname
This command sets the name of the switch. The range for name is from 1 to 255 alphanumeric
characters.
Syntax
snmp-server sysname <name>
<name> - Range is from 1 to 255 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
5.3.5.3 snmp-server location
This command sets the physical location of the switch. The range for name is from 1 to 255
alphanumeric characters.
Syntax
snmp-server location <loc>
<loc> - range is from 1 to 255 alphanumeric characters.
Default Setting
None
Command Mode
Global Config