Quanta Computer QuantaMesh - Page 225

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
225
5.3.5.10 snmp-server filter
This command creates a filter entry for use in limiting which traps will be sent to a host.
Syntax
snmp-server filter <filter-name> <oid-tree> [excluded | included]
<filter-name> - The label for the filter being created. The range is 1 to 30 characters.
<oid-tree> - The OID subtree to include or exclude from the filter. Subtrees may be specified by
numerical (1.3.6.2.4) or keywords (system), and asterisks may be used to specify a subtree family
(1.3.*.4).
excluded - The tree is excluded from the filter.
included - The tree is included in the filter.
Default Setting
None
Command Mode
Global Config
5.3.5.11 show snmp user
This command displays the currently configured SNMPv3 users.
Syntax
show snmp user [<username>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Name: The name of the user.
Group Name: The group that defines the SNMPv3 access parameters.
Auth Method: The authentication algorithm configured for this user.
Privilege Method: The encryption algorithm configured for this user.
Remote Engine ID: The engineID for the user defined on the client machine.