Quanta Computer QuantaMesh - Page 227

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
227
5.3.5.12 snmp-server user
This command creates an SNMPv3 user for access to the system.
Syntax
snmp-server user <name> <group-name> [remote <engine-idstring>] {[auth-md5 <password> |
auth-md5-key <md5-key> | auth-sha <password> | auth-sha-key <sha-key>] [priv-des <password> |
priv-des-key <des-key>]}
<name> - The username the SNMPv3 user will connect to the switch as. The range is 1 to 30
characters.
<group-name> - The name of the group the user belongs to. The range is 1 to 30 characters.
<engineid-string> - The engine-id of the remote management station that this user will be
connecting from. The range is 5 to 32 characters.
<password> - password The password the user will use for the authentication or encryption
mechanism. The range is 1 to 32 characters.
md5-key - A pregenerated MD5 authentication key. The length is 32 characters.
sha-key - A pregenerated SHA authentication key. The length is 48 characters.
des-key - A pregenerated DES encryption
no - This command removes snmp user.
Default Setting
None
Command Mode
Global Config
5.3.5.13 show snmp group
This command displays the configured groups.
Syntax
show snmp group [<groupname>]
Default Setting
None
Command Mode
Privileged Exec