5.3.5.16 snmp-server view
This command creates or modifies an existing view entry that is used by groups to determine which
objects can be accessed by a community or user.
Syntax
snmp-server view <view-name> <oid-tree> [excluded | included]
<view-name> - The label for the view being created. The range is 1 to 30 characters.
<oid-tree> - The OID subtree to include or exclude from the view. Subtrees may be specified by
numerical (1.3.6.2.4) or keywords (system), and asterisks may be used to specify a subtree family
(1.3.*.4).
excluded - The tree is excluded from the view.
included - The tree is included in the view.
no - This command removes the specified view.
Default Setting
Views are created by default to provide access to the default groups.
Command Mode
Global Config
To Next Page
Loading...