Quanta Computer QuantaMesh - Page 237

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
237
Default Setting
Disabled
Command Mode
Global Config
This command enables the DVMRP trap.
Syntax
snmp-server enable traps dvmrp
no snmp-server enable traps dvmrp
no - This command disables the DVMRP trap.
Default Setting
Disabled
Command Mode
Global Config
This command enables Link Up/Down traps for the entire switch. When enabled, link traps are sent only
if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap link-status’ command).
Syntax
snmp-server enable traps linkmode
no snmp-server enable traps linkmode
no - This command disables Link Up/Down traps for the entire switch.
Default Setting
Enabled
Command Mode
Global Config