Quanta Computer QuantaMesh - Page 259

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
259
5.3.13.9 set sflow maximum datagram size
The user can go to the CLI Global Configuration Mode to set maximum datagram size, use the sflow
receiver <index> maxdatagram <200-9116> global configuration command. Use the no sflow
receiver <index> maxdatagram return to default value 1400.
Syntax
sflow receiver <index> maxdatagram <200-9116>
no sflow receiver <index> maxdatagram
Default Setting
1400
Command Mode
Global Config
5.3.13.10 set sflow receiver
The user can go to the CLI Global Configuration Mode to create a receiver session, use the sflow
receiver <index> owner <owner> {notimeout | timeout <timeout>} global configuration command.
Use the no sflow receiver <index> to remove the session.
Syntax
sflow receiver <index> owner <owner> {notimeout | timeout <timeout>}
no sflow receiver <index>
Default Setting
None
Command Mode
Global Config