Quanta Computer QuantaMesh - Page 276

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
276
5.3.16.1.3 Occurrences and Policy-list
To associate the policy-list with a occurrence. When the occurrence is fired, the policy-list will be
executed. Maximum 16 policy-lists could be added into an occurrence.
Syntax
policy-list <name>
no policy-list <name>
<name> - Specifies the policy-list name which is to be run when the occurrence fires.
no - This command remove the policy-list from a occurrence entry.
Default Setting
None
Command Mode
Kron-occurrence Config Mode