Quanta Computer QuantaMesh - Page 280

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
280
5.4.1.3 show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance. The
<vlan-id> corresponds to an existing VLAN ID.
Syntax
show spanning-tree vlan <vlan-id>
<vlan-id> - VLAN ID (Range: 1 - 4093).
Default Setting
None
Command Mode
Privileged Exec
Display Message
VLAN Identifier: displays VLAN ID.
Associated Instance: Identifier for the associated multiple spanning tree instance or "CST" if
associated with the common and internal spanning tree.