Quanta Computer QuantaMesh - Page 308

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
308
5.5.2.6 logging syslog
This command enables syslog logging.
Syntax
logging syslog
no logging syslog
no - Disables syslog logging.
Default Setting
None
Command Mode
Globla Config
This command sets the local port number of the LOG client for logging messages.
Syntax
logging syslog port <portid>
no logging syslog port
no - Resets the local logging port to the default.
Default Setting
None
Command Mode
Globla Config