Quanta Computer QuantaMesh - Page 313

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
313
5.6.1.3 Show mail server config
This command displays information about email server configuration.
Syntax
show mail-server config
Default Setting
None
Command Mode
Privileged Exec
Display Message
No of mail servers configured The number of SMTP servers configured on the switch.
Email Alert Mail Server Address The IPv4/IPv6 address or DNS hostname of the configured SMTP
server.
Email Alert Mail Server Port The TCP port the switch uses to send email to the SMTP server.
Email Alert Security Protocol The security protocol the switch uses to authenticate with the SMTP
server.
Email Alert Username The username the switch uses to authenticate with the SMTP server.
Email Alert Password The password the switch uses to authenticate with the SMTP server.