Quanta Computer QuantaMesh - Page 332

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
332
5.8.2.9 Set the password strength policy enforcement.
The user can go to the CLI Global Configuration Mode to set the password strength policy enforcement,
use the passwords strength-check Global configuration command. Use the no passwords
strength-check return to default disable.
Syntax
passwords strength-check
no passwords strength-check
Default Setting
Disable
Command Mode
Global Config
5.8.2.10 Set the password strength maximum.
The user can go to the CLI Global Configuration Mode to set the password strength, use the passwords
strength maximum {consecutive-characters | repeated} [<0-15>] Global configuration command.
Use the no passwords strength maximum {consecutive-characters | repeated} return to default
value 0.
Syntax
passwords strength maximum {consecutive-characters | repeated} [<0-15>]
no passwords strength maximum {consecutive-characters | repeated}
Default Setting
0
Command Mode
Global Config