Quanta Computer QuantaMesh - Page 355

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
355
5.9.1.24 show port-security violation
This command displays the source MAC address of the last packet that was discarded on a locked port.
Syntax
show port-security violation { <slot/port> | port-channel <portchannel-id>}
<slot/port> - is the interface number.
<portchannel-id> - is the desired port-channel ID. The port-channel ID is range from 1 to 64.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address MAC address of discarded packet on locked ports.