5.9.2.5 username login
This command assigns the specified authentication login list to the specified user for system login. The
<username> must be a configured <username> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface from all
CLI, and telnet sessions will be blocked until the authentication is complete.
The login list associated with the ‘admin’ user cannot be changed to prevent accidental
lockout from the switch.
Syntax
username login <user> <listname>
<user> - is the login user name.
<listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config
i
To Next Page
Loading...