Quanta Computer QuantaMesh - Page 418

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
418
5.12.1.2 show lldp interface
This command uses to display a summary of the current LLDP configuration for a specific interface or for
all interfaces.
Syntax
show lldp interface [<slot/port>]
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Shows the interface in a slot/port format.
Link: Shows whether the link is up or down.
Transmit: Shows whether the interface transmits LLDPDUs.
Receive: Shows whether the interface receives LLDPDUs.
Notify: Shows whether the interface sends remote data change notifications.
TLVs: Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0
(Port Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt: Shows whether the interface transmits system management address information in the
LLDPDUs.