TLV 802.3: Total number of LLDP TLVs received on the port where the type value is 127 and OUI
type is 00-12-0F.
5.12.1.4 show lldp remote-device
This command uses to display summary information about remote devices that transmit current LLDP
data to the system. You can show information about LLDP remote data received on all ports or on a
specific port.
Syntax
show lldp remote-device [<slot/port>]
<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDPDU from the remote device.
Rem ID: Shows the ID of the remote device.
Chassis ID: The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC
address of the device.
Port ID: Shows the port number that transmitted the LLDPDU.
System Name: Shows the system name of the remote device.
To Next Page
Loading...