Quanta Computer QuantaMesh - Page 467

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
467
5.16.1.13 clear ip filter
This command is used to clear all ip filter entries.
Syntax
clear ip filter
Default Setting
None
Command Mode
Privileged Exec
5.16.1.14 clear dot1x authentication-history
This command resets the 802.1x authenticaiton-history.
Syntax
clear dot1x authentication-history [<slot/port>]
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec