Quanta Computer QuantaMesh - Page 471

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
471
5.16.1.21 clear lldp statistics
This command will use to reset all LLDP statistics.
Syntax
clear lldp statistics
Default Setting
None
Command Mode
Privileged Exec
5.16.1.22 clear lldp remote-data
This command will use to delete all information from the LLDP remote data table.
Syntax
clear lldp remote-data
Default Setting
None
Command Mode
Privileged Exec