Quanta Computer QuantaMesh - Page 474

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
474
Privileged Exec
5.16.1.27 clear ipv6 dhcp
This command will use to clear DHCPv6 statistics for all interfaces or for a specific interface. Use the
<slot/port> parameter to specify the interface.
Syntax
clear ipv6 dhcp {statistics | interface {<slot/port> | vlan <vlan-id>} statistics}
<slot/port> - Specify the interface.
<vlan-id> - Specifies the VLAN interface. The range of the VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec