Quanta Computer QuantaMesh - Page 498

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
498
5.16.18.2.4 capture remote port
Use this command to configure file capture options. This command is persistent across a reboot cycle.
Syntax
capture remote [port <port-id>]
<port-id> - Configure the listening port for remote Wireshark tool. The range of port ID is 1024 to
49151.
Default Setting
2002
Command Mode
Global Config
5.16.18.2.5 capture file size
Use this command to configure file capture options. This command is persistent across a reboot cycle.
Syntax
capture file [size <file-size>]
<file-size> - Configure the file size in KB. The range of file size is 2 to 512KB.
Default Setting
512
Command Mode
Global Config