Quanta Computer QuantaMesh - Page 539

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
539
5.20.2.7 match cos
This command adds to the specified class definition a match condition for the Class of Service value (the
only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN tagged packet). The
value may be from 0 to 7.
This command is not available on the Broadcom 5630x platform.
Syntax
match cos <0-7>
Default Setting
None
Command Mode
Class-Map Config
5.20.2.8 match secondary-cos
This command adds to the specified class definition a match condition for the secondary Class of
Service value (the inner 802.1Q tag of a double VLAN tagged packet). The value may be from 0 to 7.
This command is supported on the Broadcom 56314, 56504, 56214, 56224 platform.
Syntax
match secondary-cos <0-7>
Default Setting
None
Command Mode
Class-Map Config
i
i