Quanta Computer QuantaMesh - Page 551

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
551
5.20.2.20 match vlan
This command adds to the specified class definition a match condition based on the value of the layer 2
VLAN Identifier field (the only tag in a single tagged packet or the first or outer tag of a double VLAN
tagged packet). The VLAN ID is an integer from 1 to 4093.
This command is not available on the Broadcom 5630x platform.
Syntax
match vlan <1-4093>
Default Setting
None
Command Mode
Class-Map Config
5.20.2.21 match secondary-vlan
This command adds to the specified class definition a match condition based on the value of the layer 2
secondary VLAN Identifier field (the inner 802.1Q tag of a double VLAN tagged packet). The VLAN ID is
an integer from 1 to 4093.
Syntax
match secondary-vlan <1-4093>
Default Setting
None
Command Mode
Class-Map Config
i