Quanta Computer QuantaMesh - Page 60

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
60
5.2.1.4 load-interval
The load-interval change the length of time for which data is used to compute load port rate statistics.
Syntax
load-interval <30-600>
no load-interval
<interval> - Load interval. The range of value is 30 seconds to 600 seconds.
no - This command will be back to 300 seconds load-interval on a port.
Default Setting
300
Command Mode
Interface Config