Quanta Computer QuantaMesh - Page 609

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
609
5.23.2.6 queue cos-queue random-detect
This command activates weighted random early discard (WRED) for each specified queue on the
interfaces. Specific WRED parameters are configured using the random-detect queue-parms and the
random-detect exponential-weighting-constant commands.
Syntax
queue cos-queue random-detect <queue-id-0> [<queue-id-1> … <queue-id-7>]
no queue cos-queue random-detect <queue-id-0> [<queue-id-1> … <queue-id-7>]
<queue-id> - queue ID from 0 to 7.
no - This command restores the default value.
Default Setting
None
Command Mode
Interface Config.
Global Config.