Quanta Computer QuantaMesh - Page 614

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
614
5.25.1.2 show iscsi sessions
This command displays the iSCSI sessions.
Syntax
show iscsi sessions [detailed]
Default Setting
None
Command Mode
Privileged EXEC
Display Message
Example #1: show iscsi sessions
Session 0:
-----------------------------------------------------------------------------
Target: iqn.2006-03.com.kernsafe:q97041406.ImageDisk0
Initiator: iqn.2003-06.com.starwindsoftware.starport:ap111111
ISID: 801234567890
Example #2: show iscsi sessions detailed
Session 0:
-----------------------------------------------------------------------------
Target: iqn.2006-03.com.kernsafe:q97041406.ImageDisk0
Initiator: iqn.2003-06.com.starwindsoftware.starport:ap111111
Up Time: 00:00:11:00 (DD:HH:MM:SS)
Time for aging out: 598 secs
ISID: 801234567890
Initiator Initiator Target Target
IP Address TCP Port IP Address TCP Port
--------------- -------- --------------- --------
172.16.2.147 1090 172.16.2.151 3260
172.16.2.147 1092 172.16.2.151 3260