Quanta Computer QuantaMesh - Page 652

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
652
Syntax
permit ip host <sender-ip> mac host <sender-mac>
no permit ip host <sender-ip> mac host <sender-mac>
no – Use this command to delete a rule for a valid IP and MAC combination.
Default Setting
None
Command Mode
ARP Access-list Config
6.1.2.9 clear ip arp-cache
This command causes all ARP entries of type dynamic to be removed form the ARP cache. If the
[gateway] parameter is specified, the dynamic entries of type gateway are purged as well.
Syntax
clear ip arp-cache [gateway | interface {<slot/port> | vlan <vlan-id>}]
Default Setting
None
Command Mode
Privileged Exec