Quanta Computer QuantaMesh - Page 673

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
673
6.2.2.9 encapsulation
This command configures the link layer encapsulation type for the packet.
Syntax
encapsulation {ethernet | snap}
ethernet - The link layer encapsulation type is ethernet.
snap - The link layer encapsulation type is SNAP.
Default Setting
The default value is ethernet.
Command Mode
Interface Config
Restrictions
Routed frames are always Ethernet encapsulated when a frame is routed to a VLAN.
6.2.2.10 ip dead-gateway-detection
This command configures the Dead Gateway Detection feature.
Syntax
ip dead-gateway-detection
no ip dead-gateway-detection
Default Setting
Disabled.
Command Mode
Global Config