Quanta Computer QuantaMesh - Page 708

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
708
6.3.2.27 clear ip ospf counters
Use this command to reset global and interface statistics
Syntax
clear ip ospf counters
Default Setting
None
Command Mode
Privileged Exec
6.3.2.28 clear ip ospf neighbor
Use this command to drop the adjacency with all OSPF neighbors. On each neighbor’s interface, send a
one-way hello.Adjacencies may then be re-established. To drop all adjacencies with a specific router ID,
specify the neighbor’s Router ID using the optional parameter [neighbor-id].
Syntax
clear ip ospf neighbor [neighbor-id]
Default Setting
None
Command Mode
Privileged Exec