Quanta Computer QuantaMesh - Page 751

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
751
6.9.1.2 show ip vrrp brief
This command displays information about each virtual router configured on the switch.
Syntax
show ip vrrp brief
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid slot and port number separated by forward slashes.
VRID: Represents the router ID of the virtual router.
IP Address: Is the IP Address that was configured on the virtual router
Mode: Represents whether the virtual router is enabled or disabled.
State: Represents the state (Master/backup) of the virtual router.