Quanta Computer QuantaMesh - Page 758

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
758
6.9.2.6 ip vrrp preempt
This command sets the preemption mode value for the virtual router configured on a specified interface.
Syntax
ip vrrp <1-255> preempt [delay <0-3600>]
no ip vrrp <1-255> preempt [delay]
<1-255> - The range of virtual router ID is 1 to 255.
<0-3600> - The time to be delayed to become active router.
<no> - This command sets the default preemption mode value for the virtual router configured on a
specified interface.
Default Setting
Preempt mode: Enabled
Preempt delay: 0
Command Mode
Interface Config