Quanta Computer QuantaMesh - Page 764

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
764
longer: (Optional) Displays all entries of a prefix list that are more specific than the given
network/length.
first-match: (Optional) Displays the entry of a prefix list that matches the given network/length.
6.10.1.3 show route-map
To display a route map, use the show route-map command in Privileged EXEC mode.
Syntax
show route-map [map-name]
Default Setting
None
Command Mode
Privileged Exec
Parameter
map-name: (Optional) Name of a specific route map.