Quanta Computer QuantaMesh - Page 781

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
781
6.11.1.3 show ip bgp aggregate-address
This command displays information about the aggregate-address.
Syntax
show ip bgp aggregate-address
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Aggregation of routes with different MED values is allowed: The aggregate-different-meds is
enabled.
Prefix/Len: IP prefix and prefix length of the entry.
AS Set: With AS Set feature or not.
Summary Only: With Summary Only feature or not.
Active: The aggregate address is active or not.