show ip bgp statistics
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Delta T: The time values since decision process ran.
Phase: Decision process phase that ran.
Upd Grp: Outbound update group ID. Only set when decProcPhase is 3.
GenId: Generation ID of BGP routing table when decision process was run.
Reason: Why decision process was triggered.
Peer: Only set if decProcPhase is 1. Identifies the peer whose paths are reprocessed.
Duration: How long the decision process phase took.
Adds: Number of routes added during decision process phase.
Mods: Number of routes modified during decision process phase.
Dels: Number of routes deleted during decision process phase.
To Next Page
Loading...