Quanta Computer QuantaMesh - Page 845

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands
845
7.3.2.5 ipv6 mld router
Use this command, in the administrative mode of the router, to enable MLD in the router.
Syntax
ipv6 mld router
no ipv6 mld router
Default Setting
Disabled
Command Mode
Global Config
Interface Config
7.3.2.6 clear ipv6 mld counters
The user can go to the CLI Privilege Configuration Mode to clear MLD counters on the system, use the
clear ipv6 mld counters [<slot/port>] priviledge configuration command.
Syntax
clear ipv6 mld counters [{<slot/port> vlan <vlan-id>}]
<slot/port> - Specify the interface.
<vlan-id> - Specifies the VLAN interface. The range of the VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privilege Exec