show ipv6 interface neighbors
Default Setting
None
Command Mode
Privileged Exec
Display Message
Count of Learned Neighbors the number of neighbor mac address be learned.
Interface: Shows the interface in slot/port format.
IPv6 Address: IPV6 address of neighbor or interface.
MAC Address: Link-layer Address.
IsRtr: Shows whether the neighbor is a router. If the value is TRUE, the neighbor is known to be a
router, and FALSE otherwise. A value of FALSE might not mean Note that routers are not always
known to be routers.
Neighbor State: State of neighbor cache entry. Possible values are Incomplete, Reachable, Stale,
Delay, Probe, and Unknown.
Age(Seconds): The time in seconds that has elapsed since an entry was added to the cache.
To Next Page
Loading...