Quanta Computer QuantaMesh - Page 95

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
95
5.2.3.19 switchport native vlan
This command changes the VLAN ID which will be assigned to untagged or priority tagged frames per
interface.
Syntax
switchport native vlan <vlan-id>
no switchport native vlan <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
no - This command sets the VLAN ID per interface to 1.
Default Setting
1
Command Mode
Interface Config
This command changes the VLAN ID which will be assigned to untagged or priority tagged frames for all
interfaces.
Syntax
switchport native vlan all <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
all - All interfaces.
no - This command sets the VLAN ID for all interfaces to 1.
Default Setting
1
Command Mode
Global Config