Quanta Computer QuantaMesh - Page 978

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands
978
8.5.2.8 redistribute
This command configures RIPng protocol to redistribute routes from the specified source
protocol/routers. Source protocols have OSPF, Static, and Connetced.
Syntax
Format for OSPF as source protocol:
redistribute ospf [metric <1-15>]
Format for other source protocols:
redistribute {static | connected} [metric <1-15>]
no redistribute {ospf | static | connected} [metric]
<1 - 15> - a value for metric.
no - This command de-configures RIPng protocol to redistribute routes from the specified source
protocol/routers.
Default Setting
Metric – not-configured
Command Mode
IPv6 Router RIP Config